Assembing 3D Panel Machine

Main Technical Specifications of Assembing 3D Panel Machine:

Number	Items	Type \Unit	3DAP-3B	3DAP-4B
1	Production Capacity	M2/hr	60	40
2	Product.Dimension	mm	(2000-6000)x1200x(40-100)	(2000-6000)x1200x(40-100)
3	Welding Intensity	N	Pull-off force for each spot≥330	Pull-off force for each spot≥680
4	3D Panel Lateral Bend	mm	≤L/660	≤L/660
5	3D Panel Diagonal Error	mm	≤5	≤5
6	3D Panel Welding Defect Rate	%	≤3	≤3
7	Steel Wire Diameter	mm	2.0-3.0	3.0-4.0
8	Power Supply		380V, 50Hz, 60KVA	380V, 50Hz, 75KVA
9	Max. Outer Dimension	mm	16000x1850x2600	16000x1850x2600
10	Machine Net Weight	kg	6000	8000

Main Features of Assembing 3D Panel Machine:
1.This machine uses the slanted steel wire to weld the upper wire mesh to the lower wire mesh to form the 3D Panel. It can also produce the Single-Sided 3D Panel which is used in external wall insulation system (i.e. 3D Panel has only one side of it with the Steel Wire Mesh);
2. Has the integrated pneumatic system to ensure its stable operation, high reliability and long life span;
3. The Steel Wire Feeder of the A type equipment has the pneumatic system and the welding angle is not adjustable;
4. The Steel wire Feeder of the B type equipment has the pneumatic clamping device and the welding angle can be adjusted;
5. This equipment has a self-testing capability and automatic alarm system, which is easy to operate and maintenance;
6. It can produce two types of 3D Panels (Sparse Flashboard and Dense Flashboard);
7. It can also produce the mineral wool 3D Panel.

Products Typical Applications: