EPS Automatic Vacuum Block Molding Machines

Main Technical Specifications of EPS Automatic Vacuum Block Molding Machines:

Number	Items		Type\nit	EPSBM6000V	EPSBM6000CV	EPSBM8000V	EPSBM8000CV
1	Mould Size		mm	6120×1230×1050	6080×1230×630	8110×1240×1040	8110×1230×630
2	Mould Volume		m3	7.96	7.96	10.46	6.28
3	Products Density/Proportion		kg/m3	6-40	6-45	6-35	6-40
4	Production Capacity		block/h	4-12	4-13	3-11	4-12
5	Steam Pressure		Mpa	0.6	0.6	0.6	0.6
6	Steam Inlet DN		mm	150	100	150	150
7	Air-compressed Inlet DN		mm	50	50	65	65
8	Power Supply	Power	kw		30		30
		Voltage	v		380		380
9	Control Mode			Automatic	Automatic	Automatic	Automatic
10	Structural Features			Hydraulic Sliding-door Vacuum Cooling	Hydraulic Sliding-door Vacuum Cooling	Hydraulic Sliding-door Vacuum Cooling	Hydraulic Sliding-door Vacuum Cooling
11	Control System			PLC with Touch Screen	PLC with Touch Screen	PLC with Touch Screen	PLC with Touch Screen
12	Max. Contour Size		Mm	14000×4000×3000	14000×4000×3000	16000×4000×3000	16000×3000×3000
13	Machine Weight		Tons	15	12	17	13
14	Automatic Feeding Device			Supplied	Optional	Supplied	Optional
15	Electronic Weight			Supplied	Optional	Supplied	Optional
16	Printing			Optional	Optional	Optional	Optional

Main Features of EPS Automatic Vacuum Block Molding Machines:
1.With the use of PLC Controller (Programmable Logic Controller) and Touch Screen, the automatic looping process of opening and closing of the moulds, feeding, heating, heat preservation, cooling, mould ejection, and releasing the final product from the machine will be accomplished;
2. The Automatic Vacuum Control System does the feeding, heating, heat preservation and cooling;
3. The Vacuum System consists of the Vacuum Storage Tank, Vacuum Condensate Tank, and highly efficient water-recycling vacuum pump;
4. The machine is coupled by using high quality welding method, and to get rid of the rust, polishing, smoothing and aging treament, which gives the machine high strength, and without deformation. The density of the EPS Block can reach 6~40kg/m3, with fast EPS Block forming speed, uniform bonding, low moisture content, and with very minor deformation;
5. Applying a special Teflon coating to the surface of the mould cavity (Optional) makes the EPS Block to be easily ejected or released out of the mould;
6. The thickened wall Vacuum EPS Block Forming Machine has Automatic Conveyer, Automatic Electronic Weighing Scale, and the Automatic Printer;
7. This machine can be used to produce the width of 850mm, 950mm and 1150mm EPS Blocks, and also produce the width of 1000mm EPS Block for buildings;

The Vacuum System Principle Drawing of EPS Block Molding Machine:

Releated images: